Light pipe use notice:
A, please turn on the cooling water, when used with low into the above principles, adjust the position of outlet pipe, guarantee the cooling water cooling pipe, tube not have bubbles, and open the power supply. Requirements: cooling water using soft water (distilled water or pure water), and often pay attention to the temperature of the cooling water temperature should be controlled at 25 ℃, 30 ℃ scope, may not be too high or too low, especially in the summer, once found, high temperature cooling water should be replaced in a timely manner or stop to rest for a period of time; Did ice in cold region of cooling water, especially after laser downtime, must not let water storage in the laser tube, so as to avoid water ice lead to crack. (special note: the use of alternating current users, cooling water tank must be grounded).
Second, the laser tube of two points to the laser tube length a quarter point, to ensure the flow of cooling water in 2 l, 4 l/min, otherwise the result is bad, will cause moding, flare becomes a few points to lower power; Cooling water nozzle in the tank must be flooded back cover, otherwise every time switch machine laser cooling water pipe irrigation dissatisfaction phenomenon. Third, pay attention to ensure that the laser output window, avoid in the process of the work (including try adjusting light path) in the process of smoke splash to the output window surface and prevents the output window outside surface is pollution, power is reduced, the alcohol can dip in with cotton or silk spun out of the water gently wipe the external surface of the output window. Four, in the process of debugging, by adjusting the laser point or rotating laser orientation, in order to achieve the best effect of output, then fixed laser. Five, please note: to avoid accumulation of dust near high voltage electrode, keep dry, high voltage side as much as possible to stay away from metal, in case of high voltage spark discharge.
Six, laser in use process, can't have a scale in the cooling tube formation, jams, lest cause cooling water cooling transformer. Once found, 20% of dilute hydrochloric acid cleaning cooling pipe, remove scale. Seven, laser in glass products, and fragile. Install and use, to avoid the local stress. Eight, rational application of laser tube, laser energy saving, working current of the laser tube in 16 ma best point.
